Interface: Passenger and Freight Rail Operations Systems - NDOT Headquarters
Architecture Flow Definitions
accident report (Planned) Applicable ITS Standards
Report of commercial vehicle safety accident. The information may be provided as a response to a real–time query or proactively by the source. The query flow is not explicitly shown.
audit data (Planned) Applicable ITS Standards
Information to support a tax audit.
citation (Planned) Applicable ITS Standards
Report of commercial vehicle citation. The citation includes references to the statute(s) that was (were) violated. It includes information on the violator and the officer issuing the citation. A citation differs from a violation because it is adjudicated by the courts. The information may be provided as a response to a real–time query or proactively by the source. The query flow is not explicitly shown.
commercial vehicle permit (Planned) Applicable ITS Standards
Australia–specific flow
commercial vehicle trip information (Planned) Applicable ITS Standards
Information about vehicle trips including load information, location, speed, and routing. The information would be sanitized for distribution outside of the commercial vehicle company.
compliance review report (Planned) Applicable ITS Standards
Report containing results of carrier compliance review, including concomitant out–of–service notifications, carrier warnings/notifications. The information may be provided as a response to a real–time query of proactively by the source. The query flow is not explicitly shown.
credential application (Planned) Applicable ITS Standards
Application for commercial vehicle credentials. Authorization for payment is included.
credentials information (Planned) Applicable ITS Standards
Response containing full vehicle fuel tax and registration credentials information. "Response" may be provided in reaction to a real–time query or a standing request for updated information. The query flow is not explicitly shown.
credentials status information (Planned) Applicable ITS Standards
Credentials information such as registration, licensing, insurance, check flags, and electronic screening enrollment data. A unique identifier is included. Corresponds to the credentials portion of CVISN "snapshots." The status information may be provided as a response to a real–time query or as a result of a standing request for updated information (subscription). This may also include information about non–U.S. fleets for use by U.S. authorities, and information regarding U.S. fleets made available to Mexican and Canadian authorities. The query flow is not explicitly shown.
cv driver record (Planned) Applicable ITS Standards
Information typically maintained by a state driver licensing agency about a driver of a commercial vehicle including driver identification data, license data, permit data, and driving history details. The query flow is not explicitly shown.
cv repair status (Planned) Applicable ITS Standards
Information about the completion of a repair to a commercial vehicle.
driver log (Planned) Applicable ITS Standards
A daily log showing hours in service for the current driver. The query flow is not explicitly shown.
equipment maintenance request (Planned) Applicable ITS Standards
Identification of field equipment requiring repair and known information about the associated faults.
equipment maintenance status (Planned) Applicable ITS Standards
Current status of field equipment maintenance actions.
freight traveler information preferences (Planned) Applicable ITS Standards
Traveler information preferences from fleet and freight management systems or commercial vehicle drivers including: area covered by fleet/driver, types of freight managed (including special restrictions), preferred routes, other travel preferences pertaining to trip costs or tolls.
freight-specific traveler information (Planned) Applicable ITS Standards
Traveler information customized for freight users to indicate truck routes, permit information, truck stops, inspection stations, steep grades, high–profile vehicle advisories, etc. Information provided includes freight–related road and weather conditions, parking information, and route plans.
maint and constr work plans (Existing) Applicable ITS Standards
Future construction and maintenance work schedules and activities including anticipated closures with anticipated impact to the roadway, alternate routes, anticipated delays, closure times, and durations.
on-board safety data (Planned) Applicable ITS Standards
Safety data measured by on–board sensors. Includes information about the vehicle, vehicle components, cargo, and driver. The query flow is not explicitly shown.
rail crossing advisories (Existing) Applicable ITS Standards
Notification of Highway–Rail Intersection equipment failure, intersection blockage, or other condition requiring attention, and maintenance activities at or near highway rail intersections.
railroad advisories (Existing) Applicable ITS Standards
Real–time notification of railway–related incident or advisory.
railroad schedules (Existing) Applicable ITS Standards
Train schedules, maintenance schedules, and other information from the railroad that supports forecast of HRI closures.
request for permit (Planned) Applicable ITS Standards
Request by fleet management for oversize, overweight, or hazmat permit.
road network conditions (Planned) Applicable ITS Standards
Current and forecasted traffic information, road and weather conditions, and other road network status. Either raw data, processed data, or some combination of both may be provided by this flow. Information on diversions and alternate routes, closures, and special traffic restrictions (lane/shoulder use, weight restrictions, width restrictions, HOV requirements) in effect is included.
road network environmental situation data (Planned) Applicable ITS Standards
Aggregated environmental situation data collected from vehicles and other sources for the road network. Aggregated information would include measured air temperature, exterior light status, wiper status, sun sensor status, rain sensor status, traction control status, ALB status, and other collected vehicle system status and sensor information for the region.
road weather advisories (Planned) Applicable ITS Standards
Segment–specific weather and road conditions including real–time advisories of deteriorating road and weather conditions, medium–term advisories for the next 2–12 hours, and long–term advisories more than 12 hours into the future. The advisories may include advisories that are issued by the RSE based on locally collected environmental data (e.g., an ice on bridge advisory).
road weather information (Existing) Applicable ITS Standards
Road conditions and weather information that are made available by road maintenance operations to other transportation system operators.
route restrictions (Planned) Applicable ITS Standards
Information about routes, road segments, and areas that do not allow the transport of security sensitive hazmat cargoes or include other restrictions (such as height or weight limits).
safety inspection report (Planned) Applicable ITS Standards
Report containing results of commercial vehicle safety inspection. The information may be provided as a response to a real–time query or proactively by the source. The query flow is not explicitly shown.
safety status information (Planned) Applicable ITS Standards
Safety information such as safety ratings, security ratings or flags, inspection summaries, and violation summaries. A unique identifier is included. Corresponds to the safety and security portion of CVISN "snapshots." The status information may be provided as a response to a real–time query or as a result of a standing request for updated information (subscription). This may also include information about non–U.S. fleets for use by U.S. authorities, and information regarding U.S. fleets made available to Mexican and Canadian authorities. The query flow is not explicitly shown.
tax filing (Planned) Applicable ITS Standards
Commercial vehicle tax filing data. Authorization for payment is included.
trigger area (Planned) Applicable ITS Standards
A geographic area a commercial motor vehicle crosses into, which initiates a request to compile and transmit a safety data message. May be associated with a time period.
trigger area notification (Planned) Applicable ITS Standards
Notification to activate wireless roadside inspection safety data message collection.
unique identifiers (Planned) Applicable ITS Standards
Unique identifiers for the motor carrier, driver, and vehicle. This flow identifies the driver actually operating the vehicle in multi–driver scenarios.
work plan feedback (Existing) Applicable ITS Standards
Comments and suggested changes to proposed construction and maintenance work schedules and activities. This information influences work plan schedules so that they minimize impact to other system operations and the overall transportation system.