Interface: NDOT District 3 MCO Dispatch - NDOT District 3 Field Equipment
Architecture Flow Definitions
environmental sensor data (Existing) Applicable ITS Standards
Current road conditions (e.g., surface temperature, subsurface temperature, moisture, icing, treatment status) and surface weather conditions (e.g., air temperature, wind speed, precipitation, visibility) as measured and reported by fixed and/or mobile environmental sensors. Operational status of the sensors is also included.
environmental sensors control (Existing) Applicable ITS Standards
Data used to configure and control environmental sensors.
equipment control commands (Planned) Applicable ITS Standards
System–level control commands issued to the RSE such as reset and remote diagnostics.
field equipment commands (Planned) Applicable ITS Standards
System–level control commands issued to field equipment such as reset and remote diagnostics.
field equipment configuration settings (Planned) Applicable ITS Standards
Control settings and parameters that are used to configure field equipment.
field equipment software install/upgrade (Planned) Applicable ITS Standards
This flow supports installation and update of software residing in ITS roadway equipment. It supports download of the software installation files, including executable code and associated support files.
field equipment status (Existing) Applicable ITS Standards
Reports from field equipment (sensors, signals, signs, controllers, etc.) which indicate current operational status.
infrastructure monitoring sensor control (Existing) Applicable ITS Standards
Data used to configure and control infrastructure monitoring sensors.
infrastructure monitoring sensor data (Existing) Applicable ITS Standards
Data read from infrastructure–based sensors that monitor the condition or integrity of transportation infrastructure including bridges, tunnels, interchanges, pavement, culverts, signs, transit rail or guideway, and other roadway infrastructure. Includes sensor data and the operational status of the sensors.
infrastructure situation data (Existing) Applicable ITS Standards
Aggregated and filtered vehicle data collected from vehicle safety and convenience systems that are indicative of insfrastructure condition including traction control status, anti–lock brake status, accelerometer status, and other collected vehicle system status and sensor information. This information flow represents the aggregated and filtered environmental data sets that are provided by the RSE to the back office center.
roadway advisory radio data (Existing) Applicable ITS Standards
Information used to initialize, configure, and control roadside highway advisory radio. This flow can provide message content and delivery attributes, local message store maintenance requests, control mode commands, status queries, and all other commands and associated parameters that support remote management of these systems.
roadway advisory radio status (Existing) Applicable ITS Standards
Current operating status of highway advisory radios.
roadway dynamic signage data (Existing) Applicable ITS Standards
Information used to initialize, configure, and control dynamic message signs. This flow can provide message content and delivery attributes, local message store maintenance requests, control mode commands, status queries, and all other commands and associated parameters that support remote management of these systems.
roadway dynamic signage status (Existing) Applicable ITS Standards
Current operating status of dynamic message signs, highway advisory radios, or other configurable field equipment that provides dynamic information to the driver.
roadway treatment system control (Existing) Applicable ITS Standards
Control data for remotely located, automated devices, that treat the road surface (e.g., de–icing applications).
roadway treatment system status (Existing) Applicable ITS Standards
Current operational status of automated roadway treatment devices (e.g., anti–icing systems).
RSE application information (Planned) Applicable ITS Standards
RSE application configuration data and parameters that are used to control applications and configure the application for a specific local use. This flow also supports remote control of the application so the application can be taken offline, reset, or restarted.
RSE application install/upgrade (Planned) Applicable ITS Standards
This flow supports remote installation and update of software applications residing in the RSE. It supports transmission of the secure software installation files, including executable application code and associated support files.
RSE application status (Planned) Applicable ITS Standards
Monitoring of RSE application status including current mode, operational status, and configuration settings. It includes the status of installed applications and the application–specific data provided by the RSE.
speed monitoring control (Planned) Applicable ITS Standards
Information used to configure and control automated speed monitoring, speed warning, and speed enforcement systems.
speed monitoring information (Planned) Applicable ITS Standards
System status including current operational state and logged information including measured speeds, warning messages displayed, and violation records.
speed warning application info (Planned) Applicable ITS Standards
Roadway configuration data, current speed limits including time of day, week, or season speed limits as necessary, and warning parameters and thresholds. This flow also supports remote control of the application so the application can be taken offline, reset, or restarted.
speed warning application status (Planned) Applicable ITS Standards
Speed warning application status reported by the RSE. This includes current operational state and status of the RSE and a record of measured vehicle speeds and notifications, alerts, and warnings issued.
traffic images (Existing) Applicable ITS Standards
High fidelity, real–time traffic images suitable for surveillance monitoring by the operator or for use in machine vision applications. This flow includes the images and meta data that describes the images.
vehicle signage application info (Existing) Applicable ITS Standards
In–vehicle signing application configuration data and messaging parameters. This flow provides a list of regulatory, warning, and information messages to be displayed and parameters that support scheduling and prioritizing messages to be issued to passing vehicles. This flow also supports remote control of the application so the application can be taken offline, reset, or restarted.
vehicle signage application status (Existing) Applicable ITS Standards
In–vehicle signing application status reported by the RSE. This includes current operational state and status of the RSE and a log of messages sent to passing vehicles.
video surveillance control (Existing) Applicable ITS Standards
Information used to configure and control video surveillance systems.
work zone safety application info (Existing) Applicable ITS Standards
Work zone safety application configuration data and warning parameters and thresholds. This includes work zone configuration including geofenced crew areas and travel lanes that provide a safety boundary between work zone personnel and passing vehicles. This flow also supports remote control of the application so the application can be taken offline, reset, or restarted.
work zone safety application status (Existing) Applicable ITS Standards
Work zone safety application status reported by the RSE. This includes current operational state and status of the RSE and a record of identified work zone safety alerts and warnings issued.
work zone warning device control (Existing) Applicable ITS Standards
Data used to configure and control work zone safety monitoring and warning devices.
work zone warning status (Existing) Applicable ITS Standards
Status of a work zone safety monitoring and warning devices. This flow documents system activations and includes additional supporting information (e.g., an image) that allows verification of the alarm.