Interface: NDOT District 3 Road Operations Center - Nevada 511 Website/Mobile Application
Architecture Flow Definitions
data provision (Existing) Applicable ITS Standards
Data provision provides the source material for a publish–subscribe or query–retrieval data distribution scheme. This is the 1 of the 1:N data distribution architecture. This flow is a super–flow; it does not define data elements but is inclusive of any flow implemented using publish–subscribe or query–retrieval methods.
data publication (Existing) Applicable ITS Standards
Data publication includes those dialogs necessary to satisfy the publication portion of a data distribution architecture. The information content varies widely based on available content and the subscription, but it generally includes information on the state of transportation system operations including traffic and road conditions, advisories, incidents, transit service information, weather information, parking information, and other related data.
data query (Existing) Applicable ITS Standards
Data query includes those dialogs necessary to determine what data is available for and also submit a query for near–term response.
data query publication (Existing) Applicable ITS Standards
Data query publication includes those dialogs necessary to satisfy the response portion of a query–response action using the data distribution architecture. The information content varies widely based on available content and the query, but it generally includes information on the state of transportation system operations including traffic and road conditions, advisories, incidents, transit service information, weather information, parking information, and other related data.
data subscription (Existing) Applicable ITS Standards
Data subscription includes those dialogs necessary to determine what data is available for subscription/query, and also the dialogs necessary to create or modify data subscriptions/queries.
device identification (Planned) Applicable ITS Standards
An identifier and device type designation that is used to uniquely identify a device in the Connected Vehicle Environment.
incident information for public (Existing) Applicable ITS Standards
Report of current desensitized incident information prepared for public dissemination.
logged vehicle routes (Planned) Applicable ITS Standards
Anticipated route information for guided vehicles, special vehicles (e.g., oversize vehicles) or groups of vehicles (e.g., governor's motorcade) that may require changes in traffic control strategy.
permission application (Planned) Applicable ITS Standards
A request for permission to access a Connected Vehicle service by an end–user that requires enrollment. This may include services granted to drivers of low emissions vehicles or pedestrians with special needs that require extended crossing times for example.
permission application receipt (Planned) Applicable ITS Standards
An acknowledgment that an end–user application for a Connected Vehicle service was received and processed.
road network conditions (Existing) Applicable ITS Standards
Current and forecasted traffic information, road and weather conditions, and other road network status. Either raw data, processed data, or some combination of both may be provided by this flow. Information on diversions and alternate routes, closures, and special traffic restrictions (lane/shoulder use, weight restrictions, width restrictions, HOV requirements) in effect is included.
road network environmental situation data (Planned) Applicable ITS Standards
Aggregated environmental situation data collected from vehicles and other sources for the road network. Aggregated information would include measured air temperature, exterior light status, wiper status, sun sensor status, rain sensor status, traction control status, ALB status, and other collected vehicle system status and sensor information for the region.
traffic control information (Existing) Applicable ITS Standards
Represents the flow of traffic control and status information from a TMC to a third party TIC. This is reporting only, not actual control.
traffic images (Existing) Applicable ITS Standards
High fidelity, real–time traffic images suitable for surveillance monitoring by the operator or for use in machine vision applications. This flow includes the images and meta data that describes the images.