Interface: Nevada 511 Website/Mobile Application - Carson City Field Equipment

Nevada 511 Website/Mobile Application to Carson City Field Equipment Interface Diagram

Architecture Flow Definitions

data provision  (Existing)  Applicable ITS Standards

Data provision provides the source material for a publish–subscribe or query–retrieval data distribution scheme. This is the 1 of the 1:N data distribution architecture. This flow is a super–flow; it does not define data elements but is inclusive of any flow implemented using publish–subscribe or query–retrieval methods.

data publication  (Existing)  Applicable ITS Standards

Data publication includes those dialogs necessary to satisfy the publication portion of a data distribution architecture. The information content varies widely based on available content and the subscription, but it generally includes information on the state of transportation system operations including traffic and road conditions, advisories, incidents, transit service information, weather information, parking information, and other related data.

data query  (Existing)  Applicable ITS Standards

Data query includes those dialogs necessary to determine what data is available for and also submit a query for near–term response.

data query publication  (Existing)  Applicable ITS Standards

Data query publication includes those dialogs necessary to satisfy the response portion of a query–response action using the data distribution architecture. The information content varies widely based on available content and the query, but it generally includes information on the state of transportation system operations including traffic and road conditions, advisories, incidents, transit service information, weather information, parking information, and other related data.

data subscription  (Existing)  Applicable ITS Standards

Data subscription includes those dialogs necessary to determine what data is available for subscription/query, and also the dialogs necessary to create or modify data subscriptions/queries.

intersection geometry  (Existing)  Applicable ITS Standards

The physical geometry of an intersection covering the location and width of each approaching lane, egress lane, and valid paths between approaches and egresses. This flow also defines the location of stop lines, cross walks, specific traffic law restrictions for the intersection (e.g., turning movement restrictions), and other elements that support calculation of a safe and legal vehicle path through the intersection.

intersection status  (Existing)  Applicable ITS Standards

Current signal phase and timing information for all lanes at a signalized intersection. This flow identifies active lanes and lanes that are being stopped and specifies the length of time that the current state will persist for each lane. It also identifies signal priority and preemption status and pedestrian crossing status information where applicable.

local traveler information  (Existing)  Applicable ITS Standards

Traveler information including traffic, road, and weather conditions for a particular locality. This flow includes the location–specific traveler information and time effectivity of the information.

personal crossing safety information  (Existing)  Applicable ITS Standards

Current crossing status including permission to cross, crossing time remaining, and warnings in the event that a vehicle reports an imminent intersection infringement that may impact non–motorized users including pedestrians and cyclists.

personal location  (Existing)  Applicable ITS Standards

The current location (latitude, longitude, and elevation) reported by the personal information device

personal signal service request  (Existing)  Applicable ITS Standards

A request for right of way from a personal device that indicates the type of traveler (pedestrian, special needs pedestrian, bicyclist, etc.), anticipated time of arrival, travel path, and crossing duration.

traveler information application info  (Existing)  Applicable ITS Standards

Traveler information and associated parameters, filters, and thresholds that control the RSE's distribution of the traveler information to passing vehicles. This flow also supports remote control of the application so the application can be taken offline, reset, or restarted.

traveler information application status  (Existing)  Applicable ITS Standards

Application status reported by the RSE. This includes current operational state and status of the RSE and a record of traveler information distribution.